Sound familiar?Toronto
- The call
- The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.
In plain words
A smart lock fitted by a locksmith keeps a way in that works when the battery or network fails, a mechanical key on many models or an external battery contact on key-free ones. Most keypad deadbolts keep a conventional keyway, rekeyed during the visit so a fresh key operates it and the old one retires. Some models instead add small outside terminals where a nine-volt battery can wake a dead lock long enough to enter a code. The technician tests whichever route the model provides, shows the low-battery warning, and explains what the lock does if the internet goes quiet.
Smart Lock Installation · Toronto
How the visit goes
Scene 1
Measuring the door and its holes
Smart locks are built around the standard residential preparation, so the locksmith measures before choosing. Door thickness is usually between 35 and 45 millimetres; thicker doors need an extension kit and very thin ones may need a different model. The large cross bore for the cylinder, the smaller edge bore for the bolt and the backset from the door edge to the centre of the hole are each checked against the new lock's range. A lever set also needs the handing confirmed. Steel and fibreglass doors, doors with a mortise pocket from an older lock, and doors with glass close to the handle each change what will fit and how it is mounted.
Scene 2
Taking over a lock that is already there
When the smart lock came with the house or with a rented unit, the work is a controlled handover rather than a physical fit. The locksmith follows the model's own reset procedure, usually a button sequence inside the interior cover, which wipes codes, schedules and paired phones. The lock is then enrolled to an account you create, and every hub, voice assistant or automation once allowed to unlock it is found and removed through its own account or app, since resetting the lock does not always clear those outside connections. Batteries are swapped for a fresh specified set, firmware is updated, the override cylinder is rekeyed, and the bolt is tested through the door as if it were new.
Scene 3
A door that locks with a tap and still takes a key
You come away with a front door that responds to a code, a phone or a fob, and, on a keyed model, still accepts a conventional key in the rekeyed override. The bolt slides home without a shoulder on the door because the alignment was corrected before the lock went on, and the reinforced strike holds it. Everything has been tested with the door closed: each code, the app from inside and outside the house, the auto-lock delay and, where the model has one, the key. The finish matches the rest of the hardware, the packaging and manual are left with you, and the old lock is either handed over or taken away as you prefer.
In the van
- Thick-door extension kit
- Hole saw, spade bit and drilling jig
- Door-position sensor magnet
- Wi-Fi bridge or home hub
- Hand screwdrivers, Phillips and Torx
What shapes the quoteLawrence Heights Locksmith Services
- Removing an old mortise or non-standard lock
- Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
- Storm door and weather adjustments
- Where the entrance calls for a vented storm door panel, a keypad shield or a model rated for heat and cold exposure, those items are named separately so you can choose them or not.
- Pairing a smart deadbolt with a smart lever on the same door
- Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.
FeesSame any hour
Straight answers
Can the back door and garage door be put on the same system?
Yes, in one of two ways. Each door can get its own smart lock, all managed from the same app and account, with the same codes working at every door. Or, where the cylinders share a compatible keyway, the other doors can stay mechanical and be rekeyed so a single key operates them and the smart lock's override cylinder alike. Many households do the front door first and add the others later; the account and the codes carry across.
Will a smart lock fit my existing door?
Most residential doors have the standard preparation these locks are designed around: a large hole for the lock body, a smaller one in the edge for the bolt, and a thickness between roughly 35 and 45 millimetres. The locksmith measures all three plus the backset before recommending a model. Thicker doors take an extension kit, thin or glass-panelled doors and older doors with a mortise pocket call for a particular model or some preparation, and all of that is sorted out before the box is opened.
Do I still get a key?
In most cases, yes. The majority of keypad deadbolts keep a conventional cylinder behind or beside the keypad, and the locksmith rekeys it during the visit so a fresh key works and the old one is retired. A few designs have no keyway at all and rely on the keypad plus an emergency power contact instead. Which you prefer is part of choosing the model, and either way the fallback route is tested before the locksmith leaves.
Change or Rekey Locks
- Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
- Lock Replacement & UpgradeThe century home's original mortise lock takes a key the size of a spoon, sticks in humid weather and has worn its strike to a…
- Vintage Mortise Lock ServiceThe key turns freely in the round cylinder on the door, all the way around and back, without the bolt shifting at all.
- Gate & Building Entry LocksBetween the front gate, the side gate and the one behind the shed, there are three different padlocks, three different keys, and…
- Mailbox Lock ReplacementThe little brass key for your curbside mailbox was on the same ring as the one you lost at the gym last week.
Torontoinformation
TorontoOntario
Smart Lock Installation · Armour Heights, Lawrence Heights, Lawrence Manor, Wilson Heights, Winston Park
- Town
- Toronto
- In business
- 14 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (289) 236-8131
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 58 in 100 homes · older homes
- 23 in 100 homes · mostly attached
- About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.Decades of seasons move a frame, and an older house often has a front door that locks easily in summer and fights in winter. Setting the strike with the seasons in mind, and choosing a lubricant that stays fluid in the cold, keeps it working year round.
- Single-detached houses make up about 23% of homes in Toronto (2021 Census).Where housing is mostly apartments and condos, mailbox locks are a regular call. A worn or lost mailbox key is a small job that a locksmith handles alongside the suite door, and the new lock comes with fresh keys cut on the spot.
On-site assessment
Request a visit.
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into.
(289) 236-8131, open 24/7.